Request a quote
Sitemap
Contact us
 
Home > Applications >Drain Inlet Sediment Control > Slot or Trench Drains
Slot or Trench Drains
Slot GuardTM (SG) is a high performance, cost effective system designed to reduce sediment and debris flow into slot or trench drains during construction. Installed above ground, it significantly improves worker safety, sediment control, ease of maintenance, removal and monitoring.
Product Technical Details and Other Resources
 
Slot Guard size ranges from 6" to 20"  wide and is wide enought to fit most styles of slot or trench drains.  Install by laying on top and attaching with tie wire.  Tie wire is wrapped around the cross-bars in the drain opening and up through the Slot Guard.
A renovation project at a UPS© facility in Kentucky had nearly 500 linear feet of a trench drain across the shipping docks.  The contractor installed Slot Guard™ 84x12 to protect the 12” wide trench drain. Long drains on the AZ DOT Connect 202 Project were successfully  protected with 6" Slot Guard.
Slot Guard is designed to allow flow while protecting drains from sediment and debris.  Slot Guard can be installed with GR8 Guards or Combo Guards to cover grates which are typically built in proximity to the slot drains.  Slot Guards can be overlapped end-to-end and made continuous to protect long drains.  Drainage Inlet Protection needs to be cleaned periodically, expecially after heavy storms to clear debris, sediment and other organic matter to prepare for following storms and to prevent backup.
Product Technical Details and Other Resources  
1150 Ballena Blvd. Suite 250
Alameda, CA 94501
866.521.0724
ERTEC Environmental Systems © Copyright 2003 - 2017 All rights reserved ERTEC website by State Creative